Four-Pole Conductivity Electrode Model: EC-A402-PEEK
Brief Introduction
This product is an industrial online PEEK material 4-pole conductivity electrode independently developed and manufactured by BOQU Instrument and Made of PEEK material, it not only features high temperature resistance and high pressure resistance compared with traditional 4-pole electrodes, but also has advantages such as wider measuring range, higher measurement accuracy and better stability.The product is widely applicable to conductivity measurement in scenarios including industrial production, water quality monitoring and laboratory analysis.
Advantages
1.Max working temperature : 150°C.
2.Max working pressure:20bar at 135°C
3.Using industrial online conductivity electrodes, it can work stably for a long time.
4.Built-in temperature sensor, real-time temperature compensation.
5.Using Four-Pole technology, the maintenance cycle is longer;
6.The range is extremely wide and the anti-interference ability is strong
Technical Specification
| Specification | Four-Pole Conductivity Sensor |
| Model | EC-A402-PEEK |
| Connector Type | VP6 |
| Measuring Range | 0.001-300 mS/cm |
| Response Time | 30 s~60 s |
| Temperature Range | 0℃~150℃ |
| Temperature Compensation | Pt1000 |
| Pressure Resistance | 2.0 MPa @135℃ |
| Measuring Principle | 4-Electrode Type |
| Process Connection | PG13.5 |
Wire connection
| Cable Color | Definition |
| Transparent | EC1 |
| Blue | EC2 |
| Yellow | EC3 |
| Red | EC4 |
| White | RT |
| Green | RT |
Assembly Kit
VP6 series type
Used to Standard VP6 plug’s Electrode,transmitter’s one side is contact pin.
Length:3m
Length:5m
Length:10m
Length:15m
Diameter:7.5mm
Fixed Sheath GWHT/120
12mm diameter of pH, dissolved oxygen sensor. Modular design concept can be adapted to almost all processes, both suitable for sanitary applications and can work in hazardous areas
Fixed Sheath GWHT/3
The welding base
The rugged solder pad has been repeatedly in the industrial field to prove its value, made of 316L stainless steel, welding angle of 15 degrees
Casing plug
When the shield is removed, the process media may leak, the sleeve plug for you to solve this problem, the sealing and complete reliability.
Nut
Flow cell
Stabilize flow rate, eliminate fluctuations, eliminate dead zones, and provide rapid response.